Brinc LEMUR S - Designed to Enter Dangerous Situations to Keep People Safe
The USA Made LEMUR's ruggedized and durable composition, combined with an easy-to-use payload bay, allows the LEMUR to break glass, scale stairs, conduct two-way communications, and flip over after crashes.
Effective at breaking tempered, automotive, and most residential glass. The glass breaker spins up to 30,000 RPM and allows the LEMUR to make entry into structures. It is easily attached to the payload mount using three thumb screws.
Crashes don't end missions with Turtle Mode. If the LEMUR ends up on its back, it can flip itself over and relaunch to finish a mission.
The LEMUR S has a 1080p, 60 fps wide-angle fixed lens with a built in night-vision system and IR illuminators, allowing you to see in all lighting conditions and situations.
A Flying Cell Phone
LEMUR S comes equipped with a powerful two-way communication system.
10-Hour Perch Time
With nearly a half-day perch time, the drone can be operational while idle with fully-functional audio and video.
Built to be flown FPV, the LEMUR S has a modular high definition RGB camera, built-in night vision, and IR illuminators to ensure operations run smoothly in the most demanding indoor environments. Able to carry a wide variety of payloads, the LEMUR S can be equipped to serve in many operations from hazmat to search and rescue missions. It can breach structures, effectively locate suspects anywhere (including inside homes, skyscrapers, and buses), facilitate two-way communication, and deploy countermeasures when the mission demands.
USA Made Brinc LEMUR S - The Drone that Saves Lives
- 31 minute flight time
- 10-hour perch time
- 45-minutes battery charge time
- Max Speed: 50mph (80.5km/h)
- Weight: 2.4lbs (1.1kg)
In the Box
- 1X LEMUR Drone S Aircraft
- 1X Day / Night Vision IR Camera Module
- 2X LEMUR Drone Battery
- 1X BRINC Controller (with external tx module + high gain antenna + tethering cable fortraining)
- 1X Multi-Charger (with cable set)
- 1X Battery Charge State Monitor
- 4X 64GB Class 10 Micro SD Cards (for recording high-quality drone video locally)
- 1X Toolkit (containing an allen key set, phillips screwdriver, prop nut tool, crescent wrench, pair of tweezers, pair of side cutters, pair of needle nose pliers, zip tie kit, ca glue bottle and a bottle of ca glue accelerator)
- 1X Spare Parts Kit (containing 2 sets of 4 spare props, 2 spare IR lenses, 2 spare self righting standoffs, 2 spare optics pod standoffs, 2 spare prop nuts, 1 spare camera lens,
- 1 spare video TX antenna, 1 spare cell antenna, 1 spare cell antenna 90° adapter, 1 spare battery thumb screw, 4 spare battery foam pads, 1 spare speaker foam pad, 4 spare standoff threaded rods, 2 spare duct bumpers and 2 spare duct arm frame components)
- 1X Custom Pelican Case