The rapid release of the new accessory options for the DJI Inspire 2 has everyone excited, including our own GPC designers! Our newest Inspire 2 case offers the most cavity options available in the smallest size case we could put it in while still meeting your needs for the Cendence, CrystalSky and your choice of the most popular cameras.
Most of you using the Inspire 2 in landing mode know that this workhorse demands a lot of battery space, therefore we have packed it with 6 flights worth. Each job you have requires ultimate versatility and that’s why we created our newest Inspire 2 case with 40 custom cavities. You’ll never have to wonder if you left an accessory or piece behind, as one quick look at the case after a job and you will know immediately what is missing.
Several of these cavities are designed for you to upgrade as you upgrade your system ; the monitor cavities are slotted to secure either iPad Minis, iPad Airs, DJI 5.5” CrystalSkys or 7.875” CrystalSkys. Cameras are constantly changing so we can accommodate your X4, X5s or the new X7 and lenses for X5 or X7. Lastly, we have your controllers covered, (2) standard Inspire 2 controllers or (1) Cendence w/patch antenna and (1) standard Inspire 2.
Note: Landing Mode is designed for camera attached & quick deployment during local travel/use, GPC recommends removing the camera when shipping by common carrier or air travel luggage check and using the Travel Mode version of this case.
DJI Inspire 2 Landing Mode Case
- Water-jet precision cut with closed cell foam to resist water and dust infiltration.
- Our custom foam is housed in a durable SKB military spec case used by military and industrial leaders.
- Made in the USA, Shipped Worldwide
- Industrial strength injection molded pull handle
- In-line skate style wheels for easy transport
- Padlock holes include stainless steel padlock protector clips
- Waterproof and dust tight design (MIL-C-4150J)
- Molded-in hinge for added protection
- Trigger release latch system
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve (MIL-STD-648C)
- Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
- Resistant to impact damage (MIL-STD-810F)
- Lifetime replacement guarantee
- Remember! - If it doesn't say GPC in the foam, it isn't guaranteed!
- Inspire 2 in Landing Mode
- I2 Controller
- I2 Controller or Cendence with patch antenna
- 12 Batteries (2 on Inspire 2)
- 2 Charging Hubs
- I2 Chargers + Cables
- X7, X5s or X4 Camera Box
- 4 X7 or X5s Camera Lenses
- 2 CrystalSky Batteries
- 2 Tablets (7.85”/5.55” CrystalSky or IPAD)
- CrystalSky Charger
- 4 Inspire 2 SSD
- CINESD Station
- Spare Props
- Calibration Plate
- 2 Cendence Antennas